Channel scan
1. Use the ∧/∨ buttons to select Channel scan in the Channels menu.
2. Press the π button to enter it and press the OK button to start searching
the local program automatically.
Update scan
1. Use the ∧/∨ buttons to select Channel scan in the Channels menu.
2. Press the > button to enter it and press the OK button to start searching
the local program automatically.
Analog manual store
1. Use the ∧/∨ buttons to select Channel scan in the Channels menu.
2. Press the > button to enter it and press the ∧/∨ buttons to toggle
between Search or Fine tune.
Search: to start manual scanning from the specified frequency.
Fine tune: to fine tune the program.
Channel skip
1. Use the ∧/∨ buttons to select Channel skip in the Channels menu.
2. Press the > button to enter it and press the ∧/∨ buttons to highlight the
program you want to skip and press the OK button to confirm.
Tip: The skipped program may not be found by pressing ∧/∨ buttons but can
be access by pressing number buttons directly.
Programs with this are active
Programs with this are skipped
To Next Page
Loading...
Need help?
General
