What to do if my AOC LED TV cannot receive or select channels?
If your AOC LED TV is unable to receive or select channels, perform Auto Program to add receivable channels that are not currently in the TV’s memory. To receive or select cable channels, make sure that Cable in the Channel settings is set to On. To receive or select UHF channels via antenna, ensure Cable is set to Off.
How to fix no color or dark picture on AOC LED TV?
If your AOC LED TV displays no color, a dark picture, incorrect colors, or a picture that is too bright, try the following: Press the PICTURE button on your remote to select a different Picture Mode. You can also adjust the various Picture Mode options within the Picture settings menu to fine-tune the image to your preference.
What to do if my AOC LE19A1321 LED TV cannot receive any channels?
If your AOC LED TV isn't receiving any channels, check the following: Ensure the power cord is securely connected and that the TV is turned on. Verify the antenna/cable connections. Make sure the Cable setting is correct for your TV signal source.
How to fix dotted lines or stripes on AOC LE19A1321 screen?
To resolve dotted lines or stripes on your AOC LED TV screen, keep the TV away from noise sources such as cars, motorcycles, or hair-dryers. If you are using a 300 ohm twin lead, move any excess lead away from the TV or consider switching to a 75 ohm coaxial cable instead.
Why does my AOC LED TV have audio noise?
If you are experiencing audio noise with your AOC LED TV, make sure that the antenna is connected using a 75-ohm coaxial cable. Keep the antenna cable away from other connecting cords to prevent interference. Also, ensure that you are using an undamaged antenna cable.
Why does my AOC LE19A1321 turn off by itself?
If your AOC LED TV is turning off unexpectedly, check the following: See if the Sleep Timer is activated. Also, check the Duration setting of the Timer to ensure it's not set to automatically turn off the TV. Finally, review the PC Power Management settings in the General Settings menu.
How do I fix double images or ghosts on my AOC LE19A1321 LED TV?
To fix double images or ghosts on your AOC LED TV, start by checking the antenna and cable connections to ensure they are secure. Additionally, review the location and direction of your antenna to optimize signal reception.
What to do if my AOC LED TV shows only snow and noise on the screen?
If your AOC LED TV screen displays only snow and noise, check the following: Inspect the antenna to see if it's broken or bent. Also, consider the antenna's age, as it may have reached the end of its serviceable life (typically 3-5 years under normal use, or 1-2 years in coastal environments).
How to resolve noisy picture on my AOC LED TV?
To address a noisy picture on your AOC LED TV, ensure that the antenna is connected using a 75-ohm coaxial cable. Keep the antenna cable separated from other connecting cords to minimize interference. For best results, use an undamaged antenna cable to avoid TV interference.
What to do if my AOC LE19A1321 LED TV has good picture but no sound?
If your AOC LED TV displays a good picture but you're not hearing any sound, try these steps: First, check the volume control and make sure it's not muted by pressing the MUTE button or VOL +. Ensure that the mute icon disappears from the screen. If you have headphones connected, disconnect them. For devices connected via HDMI, verify that the audio output setting of the connected equipment is set to PCM. Note that this TV's HDMI inputs support PCM 32, 44.1, and 48 kHz.
Comprehensive safety guidelines for operating the TV and preventing potential hazards.
Guidance on safe TV placement, wall mounting, and environmental considerations for operation.
Critical warnings and procedures related to electric shock and safe power handling.
An itemized list of all accessories and components included with the AOC TV.
Step-by-step guide for attaching the TV base and setting up the remote control.
Instructions for connecting various input sources like antennas, HDMI, component, and PC.
Detailed explanation of buttons and their respective functions on the TV remote.
Procedures for choosing and switching between different TV input signal sources.
Guide to customizing video and audio settings for optimal performance.
Steps for managing channel settings and configuring PC input parameters.
Instructions for playing music files and viewing picture files from a USB storage device.
Solutions and explanations for frequently encountered TV operational problems.
Detailed technical specifications and dimensions for each AOC TV model.
General| Display diagonal | 18.5 \ |
|---|---|
| Display brightness | 250 cd/m² |
| Display resolution | 1366 x 768 pixels |
| Native aspect ratio | 16:9 |
| LED backlighting type | - |
| Viewing angle, vertical | 70 ° |
| Contrast ratio (dynamic) | 2000000:1 |
| Display diagonal (metric) | 47 cm |
| Viewing angle, horizontal | 75 ° |
| Supported graphics resolutions | 1366 x 768 |
| 3D | No |
| DVI-D ports quantity | 0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Product color | Black |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | - W |
| Power consumption (typical) | 45 W |
| Tuner type | Analog |
| Analog signal format system | NTSC |
| Package weight | 3940 g |
| RMS rated power | 6 W |
| Number of speakers | 3 |
Weight and Dimensions| Depth (without stand) | 38 mm |
|---|---|
| Width (without stand) | 453 mm |
| Height (without stand) | 303 mm |
| Weight (without stand) | 2850 g |
To Next Page
