32
7.2 Firmware Instruction
Step1˖Change the software file name to MERGE.bin, Copy F/W to USB flash disk root directory
Step2˖TV Power On
Step3˖Insert USB flash disk to TVˈthen AC off/on
Step4˖TV auto upgrade. the LED lamp will flicker. After USB F/W update OK, TV will power off/on.
Step5˖Power on, press “Menu+1999+recall”ˈthen TV will enter factory menu, Check SW version ,if OK, then do
reset .USB F/W update OK.
To Next Page
Loading...
