English
10
Controls & Connections
Video
Out
USB
PC IN
AUDIO
L
R
COMPONENT IN
TV ANTENNA
L
RVIDEO
Controls
Item Description
1�Volume +/- press to increase or decrease the sound volume level.
2�Channel
press to select the next higher or lower program number.
3�MENU
press to open or exit the OSD menu.
4�Signal source
press to select the input source.
5� (Power)
Switches the product on/standby or off.
The product is not powered off completely unless it is physically unplugged.
Connections
Item Description
AV(Audio/Video)
Input
Connect audio (L/R)/video output from an external device to these jacks
Video Output For connecting the Composite Video signal of the TV to other display devices as their source signal.
HDMI Input
Connect a HDMI signal to HDMI port. The HDMI (High definition Multimedia Input) connector provides Non-
compressed and fully digital audio/video data transmission between TV set and any HDMI audio/video devices,
including the set top box, DVD player, Blue-ray player, A/V receiver and computer.
You need an HDMI connection for viewing in 480i, 480p, 576i, 576p 720p, 1080i and 1080p modes.
PC VGA IN(RGB)&PC
Audio IN
It is used to Connect the video output port of a personal computer with a 15 pin D-sub (Analog RGB) VGA cable. It
can be connected to other simulated RGB devices.
Connect separate audio cable between PC and TV to get sound.
Please refer to “Reference Table for computer input signal” for signals that can be displayed.
Component input
Connect a component video (YPbPr) / audio (L/R) device to these jacks.
Component provides better picture quality than the composite video connections.
TV Antenna input The RF input is for connecting to the cable or VHF/UHF antenna.
USB Connect USB storage device to enjoy Photos and Music.
To Next Page
Loading...
