AOC LE32D5210_65 - Connecting TV; Cable System or VHF;UHF Antenna System; High Definition Interface; HDMI Connection

13
English
Connecting TV
Cable System or VHF/UHF Antenna System
You can enjoy standard-denition and high-denition digital programming (if available in your area), along with standard-denition analog
programming.
It is strongly recommended that you connect the antenna/cable input using a 75-ohm coaxial cable to receive optimum picture quality. A 300-
ohm twin lead cable can be easily affected by radio frequency interference, resulting in signal degradation.
Cable or VHF/UHF(or VHF only)
75-ohm coaxial
cable
rear of TV
VHF/UHF input
TUNER
TUNER
TUNER
High Denition Interface
You can enjoy high-denition programming by subscribing to a high-denition cable service or a high-denition satellite service. For the best
possible picture, make sure you connect this equipment to your TV via the HDMI or component video (with audio) input on the back of your TV.
HDMI Connection
HDMI
HDMI
HDMI
HDMI
HD Multimedia Interface
HDMI IN
If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the HDMI IN (with DVI-to-HDMI cable or adapter) jack and
connect the audio jack to the PC AUDIO IN jacks.
Component Signal Connection
Y Pb Pr
Component Video Input
Component IN
L RY Pb Pr
Y Pb Pr L R
L RY Pb Pr
L R
L R
Y Pb Pr
Y Pb Pr
Audio