English
22
Channel Setup
This setup is available in TV mode only.
CHANNEL
Auto Search
Update Search
Manual Search
Channel Lock
Channel Skip
Channel Swap
Move Select Exit
Items Description
Auto Search
TV automatically searches for the channel in the available frequency band and stores
sequentially.
1. Select Channel menu.
2. Select Auto search and press OK key or ► arrow key to tune channels automatically and store.
3. During auto searching Press Menu key to stop search.
Update Search
Update your program list by adding new channels to the end of list. Consequently, it costs more time than auto
search.
Manual Search
Search for the channels manually and store it to the desired channel number.
It can also be used for editing of channels searched by auto search if required.
Please refer to Manual Search description in next page for details.
Channel Lock
Lock the required channels, so that you can restrict the children to watch unsuitable programs.
Press OK to select channels to be locked.
Tips:
1. To enable the channel lock, Child lock should be in on condition.
2. Switch the TV off and on again for the channel lock to take effect.
Channel Skip
To skip the unwanted channel while changing the channels.
Select channels to be skipped by pressing OK key.
Tips:
1. The selected channel is skipped when you press CH +/- on your remote control.
2. Press the Numeric buttons on the remote control to access the skipped channel.
3. To un-skip the channel, enter into Channel skip sub menu and un-select the channels not to be skipped from the
channel list.
Channel swap
It is used to interchange the channels. So that you can arrange tuned channels as per your requirements.
Select the channels to be interchanged by pressing OK.
Channel swap can be done only between two channels.
Note:Make sure you have connected RF signal cable before performing channel search.
To Next Page
Loading...
