AOC n941S/plus User Manual

Service Manual AOCn941Splus
45
9.5 Factory mode adjustment
After replacing the Main board and the Panel, Check for enter the Factory mode ,then re-writing DDC is necessary.
Step:
Press MENU button
and hold,reinsert the Power cord , then ,press MENU , the monitor will may enter Factory OSD
Menu. Then Press
. Factory OSD Menu will appear in the screen.
By select this “F” button to enter Factory OSD Menu.”Auto Level”,press “menu”,Auto white balance

AOC n941S/plus Specifications

General

Brand	AOC
Model	n941S/plus
Category	Monitor
Language	English