14
OSD Setting
Basic and simple instruction on the control keys.
Luminance Color Setup Picture Boost OSD Setup Game Setting ExitExtra
Contrast 50
Brightness 50
Eco mode Standard
Gamma Gamma 1
DCR Off
HDR Mode Off
1). Press the
MENU-button
to activate the OSD window.
2). Press
<
or
>
to navigate through the functions. Once the desired function is highlighted, press the
MENU-button
to
activate it, press
<
or
>
to navigate through the sub-menu functions. Once the desired function is highlighted, press
MENU-button
to activate it.
3). Press
<
or
>
to change the settings of the selected function. Press
Exit–button
to exit. If you want to adjust any other
function, repeat steps 2-3.
4). OSD Lock Function: To lock the OSD, press and hold the
MENU-button
while the monitor is off and then press
power button
to turn the monitor on. To un-lock the OSD - press and hold the
MENU-button
while the monitor is off
and then press
power button
to turn the monitor on.
Notes:
1). If the product has only one signal input, the item of “Input Select” is disable to adjust.
2). If the product input signal resolution is the native resolution or G-SYNC(or Adaptive-Sync) mode, the “Image Ratio”
item is invalid.
3). DCR, Color Boost and Picture Boost, for these states that only one state can exist
To Next Page
Loading...
Need help?
General
