AOC Q2790PQ

10
Adjusting
Hotkeys
2
3
4 5
1
1 Menu/Enter/ Power
2 Source/Auto/Exit
3 ECO
4 Volume
5 Clear Vision
Up/Source/Auto/Exit
When the OSD is closed, press “up” button will be Source hot key function. When the OSD is closed,
press “up” button continuously about 2 second to do auto congure (Only for the models with D-Sub).
Image Ratio/Volume/Right
When there is no OSD, press the “right” key to open the volume adjustment bar
,
under the HDMI / DP source.
When there is no OSD, press the “right” key to enter the image scale switching function, under the D-SUB signal source
(If the product screen size is wide format, the hot key is disable to adjust).
Down/ECO
When there is no OSD, press “down” to active ECO adjustment bar, press left or right to adjust ECO mode.
Power/Menu/Enter
Press the Power button to turn on the monitor.
When there is no OSD, Press to display the OSD or conrm the selection. Press about 2 second to turn o󰀨 the
monitor