AOC Q27G2S User Manual

12
OSD Setting
Basic and simple instruction on the control keys.
Luminance Color Setup Picture Boost OSD Setup Game Setting ExitExtra
Contrast 50
Brightness 90
Eco mode Standard
Gamma Gamma 1
DCR Off
HDR Off
1). Press the
MENU-button
to activate the OSD window.
2). Press
Left
or
Right
to navigate through the functions. Once the desired function is highlighted, press the
MENU-
button
to activate it, press
Left
or
Right
to navigate through the sub-menu functions. Once the desired function is
highlighted, press
MENU-button
to activate it.
3). Press
Left
or
Right
to change the settings of the selected function. Press
AUTO–button
to exit. If you want to adjust
any other function, repeat steps 2-3.
4). OSD Lock/Unlock Function: OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor
is o󰀨 and then press power button to turn the monitor on. To un-lock the OSD - press and hold the MENU button while
the monitor is o󰀨 and then press power button to turn the monitor on.
Notes:
1). If the product has only one signal input, the item of “Input Select” is disable to adjust.
2). ECO modes (except Standard mode), DCR, DCB mode and Picture Boost, for these four states that only one state
can exist.

AOC Q27G2S Specifications

General

Pixel pitch	0.2331 x 0.2331 mm
Screen shape	Flat
Pixel density	109 ppi
Backlight type	W-LED
Display diagonal	27 \
Surface hardness	3H
Anti-glare screen	Yes
Adobe RGB coverage	112 %
Display technology	LED
Native aspect ratio	16:9
Maximum refresh rate	170 Hz
NTSC coverage (typical)	114 %
Viewable size, vertical	335.664 mm
sRGB coverage (typical)	131 %
Contrast ratio (dynamic)	80000000:1
Contrast ratio (typical)	1000:1
Display number of colors	1.07 billion colors
Display diagonal (metric)	68.8 cm
Viewable size, horizontal	596.736 mm
Display brightness (typical)	350 cd/m²
Product color	Black, Red
Front bezel color	Black
Market positioning	Gaming
HDCP version	2.2
DisplayPort version	1.4
Headphone connectivity	3.5 mm
Pivot angle	0 - 90 °
Tilt angle range	4 - 21.5 °
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
On Screen Display (OSD) languages	CHI (SIMPL), CHI (TR), CRO, CZE, DEU, DUT, ENG, ESP, FIN, FRE, ITA, JPN, KOR, POL, POR, RUS, SWE, TUR, UKR
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (off)	0.3 W
Power consumption (standby)	0.5 W
Power consumption (typical)	40 W
Exterior finish type	Matt
Package depth	187 mm
Package width	730 mm
Package height	520 mm
Package weight	7930 g
Cables included	AC
HDMI cable length	1.8 m

Weight and Dimensions

Depth (with stand)	227.4 mm
Height (with stand)	528.6 mm
Weight (with stand)	5600 g
Depth (without stand)	49.2 mm
Width (without stand)	611.8 mm
Height (without stand)	365.8 mm
Weight (without stand)	4500 g