21
OSD Setting
Basic and simple instruction on the control keys.
Luminance
Image Setup Color Setup Picture Boost OSD Setup Extra Exit
50
Brightness
Standard
Gamma
Gamma 1
OffDCR
Eco mode
Game Mode
Off
Contrast 50
Shadow Control 50
MediumOverdrive
1. Press the
-button to activate the OSD window.
2. Press < or > to navigate through the functions. Once the desired function is highlighted, press the
-button to
activate it . press < or > to navigate through the sub-menu functions. Once the desired function is highlighted, press
-button to activate it.
3. Press < or > to change the settings of the selected function. Press
to exit. If you want to adjust any other
function, repeat steps 2-3.
4. OSD Lock Function: To lock the OSD, press and hold the
button while the monitor is off and then press
button to turn the monitor on. To un-lock the OSD - press and hold the
button while the monitor is off and then
press
button to turn the monitor on.
Notes:
1. If the product has only one signal input, the item of "Input Select" is disable to adjust.
2. ECO modes(except Standard mode), DCR, DCB mode and Picture Boost, for these four states that only onestate
can exist.