18
OSD Setup
ExitExtra
Luminance
Color Setup
H. Position 50
V. Position 0
Transparence 25
Language English
Timeout 10
DP Capability 1.2/1.4
Break Reminder Off
OSD Setup
Picture Boost
Game Setting
USB
Off
USB Selection
Auto
PIP Setting
PIP
Language Select the OSD language.
Timeout 5-120 Adjust the OSD Timeout.
DP Capability 1.1/1.2/1.4
If the DP video content supports DP1.2/DP1.4, please
select DP1.2/DP1.4 for DP Capability; otherwise, please
select DP1.1
.
Please be noted that only DP1.2/DP1.4
support Adaptive-Sync function.
USB* Off/2.0/3.2Gen1
Select the version of the USB or turn off the USB
function.
H. Position 0-100 Adjust the horizontal position of OSD.
V. Position 0-100 Adjust the vertical position of OSD.
USB Selection
Auto / USB C / USB
up
*Auto : switch with display input source.
*USB C / USB up : x up stream not change with input
source.
Transparence 0-100 Adjust the transparence of OSD.
Break Reminder on or off
Break reminder if the user continuously work for more
than 1hrs.
Note:
*: USB C(DP Alt) signal input, and “USB” is set to “2.0”, the maximum resolution is 3840x2160@60Hz.
To Next Page
Loading...
Need help?
General
