you wish to adjust.
3. Use the ◄/► keys to select the setting.
4. Over Drive: Select Off, Normal, or Extreme.
5. FreeSync: To control support FreeSync or not, default is On.
---------------------------------------------------------------------------------------------------------
Note:
1. If FreeSync is “ON”, then the Over Drive selection is set to “Normal”
automatically.
2. If FreeSync is “OFF”, then the user can set Over Drive to either one of the
three settings including: (a) Extreme (b) Normal (c) Off.
6. TVR: To choose whether to support dynamic picture more clean control, default is Off.
---------------------------------------------------------------------------------------------------------
Note:
1. PIP/PBP mode is not support TVR.
2. HDR setting: "Auto" is not support TVR.
3. TVR set "On", when to turn on FreeSync, will auto set TVR is "Off".
4. TVR set "On", when to adjustment (Brightness, Blue Light, ACM), will auto
set TVR is "Off".
5. TVR function does not affect the (Logo, Aim Point, Message and Input Icon)
brightness.
6. TVR setting "On", when detection of Input Timing <75Hz, will auto off the
TVRand gray out to disable.
7. TVR = (Normal or Extreme), because the IC control dynamic picture is
cleaner, so the overall Brightness will be dark, "Extreme" will be darker than
“Normal”.
7. Aim point: Show an Aim point on the screen for shooting games.
-----------------------------------------------------------------------------------------------------------
Note: In PBP mode the Aim point not displayed.
OSD
To Next Page
Loading...
Need help?
General
