AOpen 24MX1 User Manual

English
2. Using the ▲/▼ keys, select Color from the OSD. Then navigate to the picture element
you wish to adjust.
3. Use the ◄/► keys to select the setting.
4. Language: Set the OSD menu language.
5. OSD timeout: Adjust the delay before turning off the OSD menu.
6. Transparency: Select the transparency when using gaming mode. The transparency
can be 0% (OFF), 20%, 40%, 60%, or 80%.
7. Refresh rate num: Display the panel’s current refresh rate on the screen.
-----------------------------------------------------------------------------------------------------------
Note: If FreeSync set "On" you can see the V Frequency to changes in the OSD.
8. OSD Lock:To choose OSD lock on/off.
---------------------------------------------------------------------------------------------------------
Note:
OSD Locked:
• Set the OSD Lock to "On" by the OSD option and press "Enter" to
execute the All Key lock function.
• The "OSD Locked" message will be displayed in the middle of the
screen.
• LED lights will be changed from blue light to orange light.
• Press any Key screen to prompt "OSD Locked" message.
OSD Unlocked:
• In normal display condition to press the any key (Not included
DC power) in the middle of more than 3 seconds to trigger "OSD
Unlock".
• The "OSD Unlock" message will be displayed in the middle of the
screen.
• LED lights will be restored to blue light.
System
Mode - User
HDMI
Picture
Color
Input
Full
Hot Key Assignment
DDC/CI
Wide Mode
On
On
HDMI Black Level
Normal
Auto Source
Quick Start Mode
Off
OSD
System
Audio
Gaming
Informaon
1. Press the MENU key to open the OSD.
2. Using the ▲/▼ keys, select Color from the OSD. Then navigate to the picture element
you wish to adjust.

AOpen 24MX1 Specifications

General

Brand	AOpen
Model	24MX1
Category	Monitor
Language	English