Need help?Do you have a question about the AOR AR2800 and is the answer not in the manual?
Details the function of the power switch for turning the receiver on and off.
Explains the dual concentric controls for volume adjustment and SSB main shift.
Describes controls for noise cancellation and fine-tuning SSB signals.
Explains tuning, signal attenuation, and BFO activation for various modes.
Describes the S-meter for signal strength and the LCD display information.
Details the numeric and command areas of the front panel keyboard.
Covers keys for entering frequencies, steps, and navigating modes.
Explains keys for selecting AM, FM, and Wide Band FM receiving modes.
Describes keys for memory lockout, delay, and hold functions.
Explains delay/hold for scan/search and the key lock feature for preventing accidental changes.
Details the BNC aerial connector, DC power input, and external speaker socket.
Describes the AF SCAN switch for controlling search/scan behavior with audio signals.
Instructions for entering frequencies, tuning, and setting frequency steps in manual mode.
How to switch between AM/FM modes and set up Single Side Band reception.
Steps to save frequencies to memory banks and retrieve stored data.
How to erase stored frequencies from memory channels.
Methods for locking out individual channels, groups, or entire memory banks.
How to select and activate a priority channel for monitoring.
Procedures for scanning all programmed memory channels or specific banks.
Steps to define search bank limits and lock out unwanted frequencies or banks.
Procedures for unlocking frequencies/banks and redefining search bank parameters.
How to save interesting frequencies found during a search into memory.
To Next Page
General
