AR7030 OPERATING MANUAL PAGE 1
1 Contents
2 Introduction, overview & quick reference .... 2
2-1 Accessories supplied
2-2 Overview - Read this if nothing else
2-3 Quick reference
2-4 Menu tree
2-5 Remote controller quick reference
3 Major Features ............................................... 7
4 Precautions .................................................... 8
4-1 Location
4-2 Looking after your receiver
4-3 Power requirements
4-4 Aerial (antenna) connection
5 Controls and functions .................................. 9
Front panel:- ................................................... 9
5-1 On/Off power switch
5-2 Liquid Crystal Display (LCD)
5-3 Main rotary tuning control - MAIN DIAL
5-4 Fast tuning button
5-5 Mode selection buttons
5-6 Volume control
5-7 Spin-wheel
5-8 General button
5-9 Memory menu button
5-10 RF and IF settings button
5-11 Filter menu button
5-12 Headphone socket
5-13 Bail bar
5-14 Internal speaker
Rear panel:- ................................................... 10
5-15 Computer control socket
5-16 Auxiliary equipment socket
5-17 DC power input
5-18 External speaker output socket
5-19 Display contrast adjustment
5-20 Ground (chassis) connection
5-21 Wire aerial connection
5-22 Antenna selection switch
5-23 50 OHM aerial socket
Infrared controller:- ....................................... 12
5-24 Filter change key
5-25 PBS change key
5-26 Treble change key
5-27 Bass change key
5-28 Increase and decrease keys
5-29 Tune-up and Tune-down keys
5-30 Volume increase and decrease keys
5-31 Store into memory key
5-32 Memory preview key
5-33 Change VFO key
5-34 Mode select keys
5-35 Number keys
5-36 Backspace key
5-37 Clear key
5-38 Memory recall key
5-39 Frequency entry keys
6 Receiver operation - Main functions ............ 14
6-1 First switch-on
6-2 Filter calibration
6-3 Memory restoration
6-4 Changing receive frequency
6-5 Changing reception mode
6-6 IF filter bandwidth selection
6-7 Passband Shift (PBS)
6-8 Audio tone controls
6-9 RF Gain (Attenuator and Preamp)
6-10 Automatic Gain Control (AGC)
6-11 IF Gain control
6-12 Squelch control
6-13 Beat Frequency Oscillator (BFO)
7 VFO functions ................................................ 22
7-1 Tuning control LOCK
7-2 Selecting VFO-A and VFO-B
7-3 Dual VFO operation
8 Memory facilities ........................................... 24
8-1 Preview memory contents
8-2 Store into memory
8-3 Recall from memory
8-4 Memory scanning
8-5 Memory technical details
9 Setup, Timer and Config menu options ....... 28
9-1 Setup menu options
9-2 Timer settings
9-3 Setting the clock
9-4 Config menu options
10 Optional accessories .................................... 30
11 Aerials (Antennas) and earth systems ......... 31
12 Propagation - short wave bands .................. 32
13 Technical specification ................................. 33
13-1 Block diagram .............................................. IBC
To Next Page
Need help?
Notch Filter
