Need help?Do you have a question about the AOR AR-DV1 and is the answer not in the manual?
General| Frequency Range | 100 kHz - 1300 MHz |
|---|---|
| Modes | AM, FM, WFM, CW |
| Channel Memory | 2000 channels |
| Antenna Input | BNC connector, 50 ohms |
| Power Supply | 13.8 V DC |
| Weight | 1.5 kg |
| Dimensions | 179 (W) x 50 (H) x 215 (D) mm |
General introduction to the AR-DV1 SDR Digital Voice Receiver.
Guidelines for maintaining and handling the AR-DV1 receiver.
Description of the buttons, knobs, and display on the front panel of the AR-DV1.
Description of the connectors and ports located on the rear panel of the AR-DV1.
Steps to connect antenna and power for initial operation of the AR-DV1.
Procedure for powering on and initializing the AR-DV1 receiver.
How to adjust the squelch level to minimize background noise.
Description of various receive modes (AM, FM, SSB, CW) and their uses.
How to configure Automatic Gain Control settings for different modes.
Steps to backup receiver data (channels, config) to an SD card.
Steps to restore receiver data from an SD card.
Procedure to save current VFO data into a memory channel.
Procedure to initiate the memory scan process.
Explanation of VFO search and Program search types.
Update the receiver's firmware using a file from an SD card.
How to access the option menu for various settings.
Select and adjust tuning frequency steps for different bands and band plans.
Configure and activate the priority function to monitor selected frequencies.
Perform system or full reset to restore factory default settings.
To Next Page
