AOR AR-DV1 - 10-7 SCR (ANALOG VOICE DESCRAMBLER)

53
017 023 025 026 031 032 036 043 047 050
051 053 054 065 071 072 073 074 114 115
116 122 125 131 132 134 143 145 152 155
156 162 165 172 174 205 212 223 225 226
243 244 245 246 251 252 255 261 263 265
266 271 274 306 311 315 325 331 332 343
346 351 356 364 365 371 411 412 413 423
434 432 445 446 452 454 455 462 464 465
466 503 506 516 523 526 532 546 565 606
612 624 627 631 632 654 662 664 703 712
723 731 732 734 743 754
DCS codes
Default:017
10-7 SCR (ANALOG VOICE DESCRAMBLER)
(Not available for US consumer version)
Analog voice descrambler is used to decode scrambled analog voice transmission by frequency
inversion.
(Note: This function operates only in FM mode with less than 30 kHz of IF-BW.)
To activate the function, perform the following steps:
1. Press the [F] key and then the [1] key.
2. Press the [▼] key to select “SQL” parameter in reverse contrast.
3. Rotate the dial knob to select “SCR” in reverse contrast.
4. Press the [▼] key to select “V.SCR” parameter in reverse contrast.
5. Rotate the dial knob to select the inversion frequency from the range of 2000 Hz ~ 7000 Hz in 10 Hz
steps. (Default: 2000 Hz) Once properly selected, the decoded voice becomes intelligible.
6. Press the [ENT] key to accept the entry and return to a standard display.
Alternatively, press the [CLR] key to abort entry.