59
By pressing and holding the [CLR] key for two seconds, the following screen will appear.
Press the [ENT] key to cancel recording and return to normal display. Recorded signals will be saved on
SD card.
If no SD card is inserted into slot, an error message will appear.
11-3-5 SLEEP TIMER
Once the sleep timer is activated, the AR-DV1 will automatically switch off after the sleep time duration
has expired.
To set sleep timer, perform the following steps:
1. Press the [F] key and then the [0] key.
2. On the sleep timer screen, rotate the dial knob to select sleep time from the period of 0, 15, 30, 60, 90,
120 minutes. (0: Sleep timer off) (2)
3. Press the [ENT] key to accept the entry and the sleep timer will start.
The “S” icon with reverse contrast will start to blink. (1) Alternatively, press the [CLR] key to abort the
entry.
4. To deactivate the sleep timer, repeat above steps 1 and 2 then select “0”.
(Note: Do not press the volume knob while the sleep timer is activated.)
To Next Page
Loading...
