AOR AR-DV1 - 3 GETTING STARTED; 3-1 MAKING THE AR-DV1 READY FOR OPERATION; 3-2 SWITCHING ON FOR THE FIRST TIME

13
[CLR] This key is used to cancel frequency entry during programming or exit from a menu.
▼
▼▼
▼ In VFO search mode or program search mode, pressing this key will change frequency
upward or change search direction.
In memory mode, pressing this key will move to next channel.
In memory scan mode, pressing this key will change the scan direction or resume scan.
▲ In VFO search mode or program search mode, pressing this key will change frequency
downward or change search direction.
In memory mode, pressing this key will move to next channel.
In memory scan mode, pressing this key will change the scan direction or resume scan.
SECONDARY FUNCTIONS
Key
Press the [F], then press
this key.
Press and hold the [F] key
for two seconds, then
press this key
VFO Move to VFO-A Set VFO
SRCH Set search group N/A
SCAN Set scan group Set memory bank
●
Configure SD card N/A
1 Configure tone/code squelch Set voice squelch
2 Set frequency step N/A
3 Set clock N/A
4 Priority on/off Set priority
5 Set AGC (AM only) N/A
6 Set search bank N/A
7 Configuration menu N/A
8 Data editor N/A
9 Set option N/A
0 Set sleep timer N/A
. Set offset N/A
ENT N/A N/A
PASS Set pass frequency Deselect pass frequency
MODE Set IF BW (Analog) N/A
CLR Cancel entry N/A
▲
▲▲
▲
Frequency can be changed upward
in 10 incremental steps
N/A
▼
▼▼
▼
Frequency can be changed
downward in 10 incremental steps
N/A