Need help?Do you have a question about the AOR AR1000 and is the answer not in the manual?
Adjusts audio output level; turning fully counter-clockwise powers off the receiver.
Eliminates background noise on unused frequencies and sets signal detection threshold.
Used for tuning frequencies, adjusting settings, and navigating menus.
Used for inputting frequencies, channel numbers, and bank selections.
Initiates frequency search and advances frequency after search stops.
Initiates memory scanning and advances memory channels after scan stops.
Engages manual mode for direct frequency or memory selection.
Prevents a channel or frequency from being scanned or searched.
Controls scan/search behavior on busy channels; HOLD stops, DELAY waits before resuming.
Controls search/scan direction and allows stepping downwards.
Step-by-step instructions for manually entering a desired frequency.
How to use the tuning knob to change frequencies and observe display feedback.
Procedure to store the current frequency into a memory channel.
How to input a new frequency and mode directly into memory.
To Next Page
General
