AOR AR1000 - Memory Group Lockout; Memory Bank Lockout; Releasing Memory Lockout; Search Operation

5. Memory group lockout.
Choose the bottom channel of the group you wish to lockout, and
proceed as for memory channel lockout, then press:
MANUAL - LOCKOUT
for each channel you wish to lockout.
Each channel lockout will be confirmed by flashing
wL.OUT1l in the
display.
6. Memory bank lockout (all 100 channels)
MANUAL - BANK - (bottom channel in bank) - BANK - LOCKOUT
Example: Lockout bank 7 ( i.e. channels 700 to 799 inclusive)
MANUAL - BANK - 700 - BANK - LOCKOUT
7. Releasing memory channel lockout.
MANUAL - BANK - (bottom channel in locked out bank) - LOCKOUT
Lockout release will be confirmed by the disappearance of the flashing
llL.OUT1l from the display.
Search Overation
1. Bank search
SEARCH - BANK - (any bank number from 0 - 9)
2. Programmed bank search
SEARCH - BANK - PROG - (start bank number) - LIMIT - (end bank number)
- EWER
Example: To search banks
5 to 8 inclusive
SEARCH - BANK - PROG - 5 - LIMIT - 8 - EWER
Example: To search a single bank (bank 2) continuously.
SEARCH
- BANK - PROG - 2 - LIMIT - 2 - ENTER
3. Store search frequency into memory.
PRESS DELAY/HOLD so that lnHOLDll shows in display, then ENTER -
(bank and channel number)
4. Search lockout
Simply press LOCKOUT if the search stops on a continuously occupied
frequency, and the search will continue, automatically ignoring the
locked out frequency on the next search.
5. Releasing search lockout
SEARCH - BANK - PROG - LOCKOUT (or ENTER)
6. Search bank lockout
SEARCH - BANK (bank number) - BANK - LOCKOUT
Page 5