4. To stop recording, press and hold the [CONTROL] switch again for two seconds. The red LED will go
off.
1-2 Playback
Before playing back audio files, perform the following steps:
1. Set the receiver to “Voice Inverter” mode.
[Note: The voice inverter function is disabled with US consumer version even though the menu is displayed on the
LCD].
Press and hold the [CLEAR] key for two seconds.
2. “VOICE INVERT ON / OFF” will appear on the LCD.
3. Press the [ENT] key.
4. On the bottom left of the LCD, “v nnn” will be displayed. (nnn: 3 digit number)
5. Rotate the squelch knob counterclockwise to display “S” icon on the center bottom of the LCD.
The background squelch noise will be heard.
(If the squelch is closed, no audio will be heard while playing back audio.)
To Next Page
Loading...
