Need help?Do you have a question about the APC Smart-UPS VT and is the answer not in the manual?
General| Noise level | 55 dB |
|---|---|
| Output power | 24000 W |
| Input frequency | 40/70 Hz |
| Maximum current | 41 A |
| Output power capacity | 30 kVA |
| Emergency Power Off (EPO) | Yes |
| Battery type | VRLA |
| Dimensions (WxDxH) | 559 x 813 x 1499 mm |
| Nominal input voltage | 400 V |
| Certification | C-tick, CE, EN 50091-2, EN/IEC 62040-3, IEC 61000-3-2, IEC 61000-3-3, ISO 14001, ISO 9001, VFI-SS-112 |
| Product color | Black |
| Battery recharge time | 5 h |
| Operating altitude | 0 - 999.9 m |
| Non-operating altitude | 0 - 15000 m |
| Storage temperature (T-T) | -15 - 45 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
| Harmonized System (HS) code | 85078000 |
Weight and Dimensions| Weight | 629090 g |
|---|---|
| Package weight | 660000 g |
Guide contains important instructions for handling UPS, Battery Enclosures, and Batteries.
Explanation of warning, caution, and informational symbols used throughout the manual.
Overview of the Smart-UPS VT UPS and Extended Run Battery Enclosure.
Description of various operating modes like Normal, Battery, and Bypass operations.
Explanation of the UPS display interface, LEDs, and navigation keys.
Instructions on navigating menus, using control functions, and viewing status.
Lists status and alarm messages with meanings and corrective actions for troubleshooting.
Step-by-step guide for removing the front panel of the UPS unit.
Step-by-step guide for installing the front panel of the UPS unit.
Steps for applying power to the UPS system and initiating its start-up sequence.
Process for confirming or selecting the correct voltage and frequency for the UPS.
Explanation of the mechanical bypass lever and its function for manual switching.
Procedure to switch the UPS into mechanical bypass mode for maintenance.
Steps to return the UPS from mechanical bypass back to normal operation.
Instructions for replacing the network management card in the UPS unit.
Critical safety precautions to be followed before replacing battery modules.
Description and specifications of the battery module used in the UPS system.
Procedure for removing and installing battery locks for securing battery modules.
Step-by-step guide for safely removing a battery module from the UPS.
Instructions for installing new or replacement battery modules into the UPS.
List of available replacement parts and their corresponding APC SKU numbers.
Procedure for using the Maintenance Bypass Panel to isolate the UPS.
Details of the limited factory warranty provided by American Power Conversion.
Specifies the APC products that are included under the warranty terms.
Explains the duration and conditions of the warranty for the product.
Defines the warranty as non-transferable and limited to the original purchaser.
Overview of various UPS components and optional accessories available.
Details system sizes, part numbers, battery module counts, and weights.
Explanation of the coding system used for APC part numbers.
Details on securing battery modules and anchoring the UPS to the floor.
Information about the Extended Run Battery Enclosure and its specifications.
List of part numbers for different configurations of the XR Battery Enclosure.
Specific part number for the battery module used with the UPS.
To Next Page
