To Next PageTo Next Page
Need help?Do you have a question about the APC 1500 VA and is the answer not in the manual?
Inspect UPS upon receipt, verify contents, and handle packaging responsibly.
Place UPS in an environment meeting temperature and humidity specifications for optimal operation.
Follow rail kit instructions for rack mounting and battery connection.
Steps for vertical tower installation, including module repositioning and bezel attachment.
Connect loads to UPS outlets and understand rear panel connections for various models.
Instructions for connecting the UPS to a network via serial or USB ports.
Procedure for powering on the UPS, including connecting to a suitable utility receptacle.
How the UPS operates on battery during power failures and associated alarms.
Explanation of the indicators, buttons, and display elements on the UPS front panel.
How to perform manual self-tests and initiate a cold start for battery power.
Feature to display and interpret input utility voltage levels using front panel indicators.
Configure the interval at which the UPS will execute a self-test.
Use this field to uniquely identify the UPS for network management.
Reset this date when you replace the internal battery module.
Set the minimum battery percentage before powering up connected equipment after shutdown.
Adjust UPS reaction to line voltage distortions to protect equipment.
User can mute alarms or disable all existing alarms permanently.
Set the interval between shutdown command and power cutoff to outlets.
Configure the time for unattended shutdown based on remaining battery runtime.
Set delay after utility power return before turning on to avoid circuit overload.
Adjust the high voltage transfer point to avoid unnecessary battery usage.
Adjust the low voltage transfer point to operate with low input voltages.
Guidelines for storing the UPS in a cool, dry location with a fully charged battery.
Information on battery lifespan, replacement procedure, and hot-swappable capabilities.
Step-by-step guide for replacing the UPS power processing module.
Instructions for safely shipping the UPS and obtaining professional service.
How to contact APC customer support for assistance and information.
Solutions for issues where the UPS fails to power on or cannot be turned off.
Troubleshooting intermittent beeps and problems with insufficient battery backup time.
Resolving issues where the UPS output voltage is too low or too high.
Diagnosing problems with specific outlets being powered off or incorrect runtime warnings.
Understanding and resolving issues indicated by blinking LEDs or constant beeping sounds.
Solutions for overload conditions and when the replace battery LED is illuminated.
Troubleshooting site wiring faults, polarity reversal, and tripped input circuit breakers.
Understanding and resolving issues related to AVR and Bypass LED illumination.
Addressing situations with no utility power, tripped breakers, or unexpected UPS operation.
Diagnosing issues when battery charge and load LEDs flash simultaneously due to high temperature.
Regulatory compliance details for 120V and 230V models, including FCC and CE markings.
Formal declaration of conformity to European standards and directives for the equipment.
Details of the product's limited warranty period, coverage, and conditions for claims.
Inspect UPS upon receipt, verify contents, and handle packaging responsibly.
Place UPS in an environment meeting temperature and humidity specifications for optimal operation.
Follow rail kit instructions for rack mounting and battery connection.
Steps for vertical tower installation, including module repositioning and bezel attachment.
Connect loads to UPS outlets and understand rear panel connections for various models.
Instructions for connecting the UPS to a network via serial or USB ports.
Procedure for powering on the UPS, including connecting to a suitable utility receptacle.
How the UPS operates on battery during power failures and associated alarms.
Explanation of the indicators, buttons, and display elements on the UPS front panel.
How to perform manual self-tests and initiate a cold start for battery power.
Feature to display and interpret input utility voltage levels using front panel indicators.
Configure the interval at which the UPS will execute a self-test.
Use this field to uniquely identify the UPS for network management.
Reset this date when you replace the internal battery module.
Set the minimum battery percentage before powering up connected equipment after shutdown.
Adjust UPS reaction to line voltage distortions to protect equipment.
User can mute alarms or disable all existing alarms permanently.
Set the interval between shutdown command and power cutoff to outlets.
Configure the time for unattended shutdown based on remaining battery runtime.
Set delay after utility power return before turning on to avoid circuit overload.
Adjust the high voltage transfer point to avoid unnecessary battery usage.
Adjust the low voltage transfer point to operate with low input voltages.
Guidelines for storing the UPS in a cool, dry location with a fully charged battery.
Information on battery lifespan, replacement procedure, and hot-swappable capabilities.
Step-by-step guide for replacing the UPS power processing module.
Instructions for safely shipping the UPS and obtaining professional service.
How to contact APC customer support for assistance and information.
Solutions for issues where the UPS fails to power on or cannot be turned off.
Troubleshooting intermittent beeps and problems with insufficient battery backup time.
Resolving issues where the UPS output voltage is too low or too high.
Diagnosing problems with specific outlets being powered off or incorrect runtime warnings.
Understanding and resolving issues indicated by blinking LEDs or constant beeping sounds.
Solutions for overload conditions and when the replace battery LED is illuminated.
Troubleshooting site wiring faults, polarity reversal, and tripped input circuit breakers.
Understanding and resolving issues related to AVR and Bypass LED illumination.
Addressing situations with no utility power, tripped breakers, or unexpected UPS operation.
Diagnosing issues when battery charge and load LEDs flash simultaneously due to high temperature.
Regulatory compliance details for 120V and 230V models, including FCC and CE markings.
Formal declaration of conformity to European standards and directives for the equipment.
Details of the product's limited warranty period, coverage, and conditions for claims.
General| Output Voltage | 120V |
|---|---|
| Input Voltage | 120V |
| Interface Port | USB |
| Battery Type | Sealed Lead-Acid |
| Input Connections | NEMA 5-15P |
| Capacity | 1500 VA / 900 W |
| Cord Length | 6 ft |
| Frequency | 50/60 Hz |
| Transfer Time | 6 ms typical |
| Backup Time at Half Load | Typically 10-15 minutes |
