Need help?Do you have a question about the APC 1000XL and is the answer not in the manual?
General| Brand | APC |
|---|---|
| Model | 1000XL |
| Category | Power Supply |
| Language | English |
Inspect the UPS upon receipt and check package contents.
Select a sturdy location and adhere to placement limits for temperature and humidity.
Steps to connect equipment, power cord, and turn on the UPS.
Details on Serial Port, USB Port, and External Battery Pack Connector.
Use of the TVSS screw for surge suppression device grounding.
Explanation of front panel controls and status LEDs.
How the UPS operates on battery power and alarm behavior.
Information on battery life and recommended replacement intervals.
Configuration of the UPS's automatic self-testing schedule.
Field to uniquely identify the UPS for network management.
Adjusting UPS sensitivity to line voltage fluctuations.
Options to mute or disable UPS alarms.
Sets the interval between shutdown command and actual shutdown.
Setting the warning interval for low battery conditions.
Setting voltage thresholds for transferring to battery power.
Selecting the output voltage for 230V models.
Guidelines for storing the UPS in a cool, dry location.
Procedure for safely replacing the hot-swappable battery module.
Instructions for disconnecting the battery for shipping compliance.
Solutions for when the UPS fails to power on.
Possible causes and solutions for the UPS not turning off.
Explanation for occasional beeping during normal UPS operation.
Reasons for reduced battery backup time and solutions.
Troubleshooting constant beeping and all LEDs lit, indicating an internal fault.
Cause and meaning of sequential flashing of front panel LEDs.
Troubleshooting when all LEDs are off while the UPS is powered.
Solutions for an overloaded UPS emitting a sustained alarm.
Indicates issues with battery connection, charge, or self-test failure.
Explains site wiring fault LED for 120V models and its implications.
How to address the input circuit breaker tripping.
Steps to follow if the UPS requires service or repair.
Information on how to contact APC for support.
Details on agency approvals and RF warnings for different models.
Statement of conformity with relevant standards and directives.
Terms and conditions of the product's limited warranty.
To Next Page