Need help?Do you have a question about the APC 100 and is the answer not in the manual?
General| Model | APC 100 |
|---|---|
| Category | Power Supply |
| Output Power Capacity | 100VA/60W |
| Nominal Output Voltage | 230V |
| Nominal Input Voltage | 230V |
| Waveform Type | Stepped approximation to a sinewave |
| Frequency | 50/60 Hz |
| Battery Type | Lead-acid battery |
| Interface Ports | USB, Serial |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -15°C to 45°C |
| Humidity | 0% to 95% non-condensing |
| Audible Noise at 1m | Less than 40 dB |
Inspect the UPS upon receipt and check package contents for damage or missing items.
Follow instructions to install mounting rails and brackets for rack mounting.
Select a sturdy location meeting environmental limits for temperature and humidity.
Detailed steps for securely mounting the heavy UPS unit into a server rack.
Connect the battery plug and attach the front bezel according to the steps provided.
Guide on connecting external devices and the main power cord to the UPS.
Overview of Serial Port, USB Port, and TVSS Screw for system connections.
Explanation of the front panel layout, power controls, and status indicators (LEDs).
How the UPS functions when on battery power and associated alarm notifications.
Details on automatic and manual self-tests to verify battery health and performance.
Set automatic self-test intervals and unique UPS identification for management.
Configure how the UPS responds to line voltage fluctuations for optimal protection.
Customize alarm delays after line failure and set shutdown intervals for power events.
Define voltage thresholds for switching between utility and battery power.
Guidelines for storing the UPS in different temperatures and handling batteries.
Step-by-step instructions for safely replacing the UPS battery module.
Procedures for disconnecting the battery and packaging the UPS for transport.
Solutions for common issues like UPS not turning on or off, and occasional beeps.
Diagnosing problems with backup time, overload, or specific LED status indicators.
Addressing site wiring faults, input breaker trips, and voltage sensitivity problems.
Using the UPS display to check input utility voltage and troubleshoot power issues.
Steps to follow for getting the UPS serviced or repaired through APC.
Information on how to contact APC support for assistance and inquiries.
Details on compliance certifications, agency approvals, and radio frequency interference.
Explanation of the product's limited warranty period, coverage, and exclusions.
To Next Page