Need help?Do you have a question about the APC 1000 and is the answer not in the manual?
General| Output Power Capacity (Watts) | 670 Watts |
|---|---|
| Nominal Output Voltage | 230V |
| Nominal Input Voltage | 230V |
| Frequency | 50/60 Hz |
| Input Connections | IEC 320 C14 |
| Control panel | LED status indicators |
| Communication Ports | USB |
| Input Frequency | 50/60 Hz |
| Output Connections | IEC 320 C13 |
| Battery Type | Sealed lead-acid battery (maintenance-free) |
Description of the APC Smart-UPS 750-3000 VA 120/230 Vac Tower UPS.
Safety precautions and guidelines for installing and handling the UPS.
Details on the front panel components of the UPS models.
Description of rear panel connectors and components for various UPS models.
Guidelines for the operating environment of the UPS unit.
Environmental factors affecting UPS battery life and performance.
Information on installing the UPS unit.
Information on installing the Network Management Card (NMC).
Steps and notes for connecting equipment to the UPS.
Explanation of the function of rear panel ports and connectors.
Introduction to the UPS display interface and its components.
Instructions on navigating and interacting with the UPS display.
Functions and details of standard menus like Status, Configuration, Test & Diags, About.
Detailed status information available through advanced menus.
Advanced configuration settings for the UPS.
Controlling outlet groups via advanced menus.
Performing tests and diagnostics through advanced menus.
Viewing the event log for UPS changes and faults.
Viewing unit information like hardware/software version and NMC details.
Configuring initial start-up settings like language and power quality.
Configuring general settings like high/low transfer points and voltage.
Managing and configuring main and switched outlet groups.
Settings for Network Management Card (NMC) configuration.
Overview of the Emergency Power Off (EPO) safety feature.
Wiring instructions for normally open EPO switch or relay contacts.
Wiring instructions for normally closed EPO switch or relay contacts.
Troubleshoot UPS power on, no output, and battery operation issues.
Troubleshoot UPS backup runtime, overload, and beeping alarms.
Troubleshoot display indicators, fault lights, and site wiring faults.
Troubleshoot the illuminated replace battery indicator and related issues.
Steps for obtaining service, including troubleshooting and contacting support.
Instructions for safely shutting down and preparing the UPS for transport.
Information on how to contact APC worldwide customer support.
Details of the limited warranty for APC Smart-UPS products.
List of harmonized standards and council directives the product conforms to.
Details on manufacturers, model numbers, and EC declaration date.
To Next Page
