Preparing to install
990-12411 Smart-UPS VT Battery Breaker Box, 10-40kVA, 400V, Installation and Operation 11
How to mount the Battery Breaker Box
Use the provided fittings to mount the Battery Breaker Box to the wall (fittings available in a plastic
bag inside the Battery Breaker Box).
Fasten wall brackets – one in each corner – to the Battery Breaker Box.
Drill holes according to hole distance specifications provided on the above drawing, and mount
the Battery Breaker Box using suitable screws (not supplied).
361mm
270mm
To Next Page
Loading...
