APC Smart-UPS VT - Page 19

990-12411 Smart-UPS VT Battery Breaker Box, 10-40kVA, 400V, Installation and Operation 13
Attaching cable lugs

Guide cables through holes in top/bottom using the provided grommets.

Attach cable lugs.

Fasten cable lugs to the breaker.

Guide PE cables through knockouts in top/bottom using the provided grommets. Attach cable
lug, remove nuts and washers from stud, mount the cable lug onto the stud and reattach M8
washers and nuts.

Connect control cables according to schematic inside the Battery Breaker Box using the
provided grommets.
To batteries
To UPS







