Safety
2 Smart-UPS VT Battery Breaker Box, 10-40kVA, 400V, Installation and Operation 990-12411
General safety
WARNING!
All electrical power and control wiring must be performed by a qualified electrician and
comply with local and national codes.
WARNING!
The total system contains Hazardous AC/DC voltages, which are supplied from multiple
power sources. Some terminals and components remain live even when the system is
switched off!
WARNING!
Only trained personnel familiar with the construction and operation of the equipment and
the electrical and mechanical hazards involved, may install and remove system
components.
Indicates that a switch or current protection device is ON.
Indicates that a switch or a breaker is OFF.
To Next Page
Loading...
