Name: APEC ESSENCE RO Series
Brand: APEC
Rating: 5 (1 reviews)

To Previous Page

IMPORTANT!

How To Disconnect End Plugs:

Push in and hold down on the collet ring square against the fitting. While holding down the collet ring, pull out the end plug

with your other hand. There are two types of end plugs depending on the model you own. Both types are disconnected the same

way.

NOTE: If end plugs are removed inappropriately, collet rings may come off from QC fittings or elbows.

Make Sure Collet Ring is IN PLACE:

Before inserting tubing, make sure collet ring sits in QC fittings or elbows properly. Leak will occur if collet ring came off or is

missing! Please do not proceed further installation and contact us at: -800-880-4808 if you need further assistance.

2 Types of End Plugs

Soft Plug

for Ultimate

Series

With

Collet Ring

Without

Collet Ring

Hard Plug

for Essence

Series

Questions and Answers:

Need help?

Do you have a question about the APEC ESSENCE RO Series and is the answer not in the manual?

APEC ESSENCE RO Series Specifications

General