Apeks WTX-D - Page 10

Table of Contents
© 2014 Apeks
Loops for Optional Retractor Kit
The outer bag has loops sewn to the inside for an optional retractor kit. The retractors will assist in
keeping the buoyancy cell streamlined while diving. The retractor kit may be ordered separately from
your Authorized Apeks Dealer. Instructions for attachment are included with the retractor kit.
Braided MP Inator Hose
The Apeks technical airway comes equipped with a light weight, braided MP inator hose. This gives
the airway greater exibility for ination / deation of the buoyancy cell compared to standard MP inator
hoses that can be cumbersome and difcult to maneuver.
NOTE: WTX-D18 buoyancy cell does not have loops sewn to the inside of the outer bag,
therefore cannot accommodate the retractor kit.
Side Panels for Additional Lift Capacity
Side panels allow the buoyancy cell to expand and provide additional lift capacity without increasing
the overall size.
Oval Grommets for Dual Cylinder Bands
Each buoyancy cell incorporates four oval slots. These allow the buoyancy cell to be mated directly
to the WTX harness, WTX backplate or ultralight plate with the use of two universal or GripLock™
cylinder bands.