P ro be R ep laceme nt
To replace a probe: 1)take off the probe cap; 2) screw off the probe ring 3) unplug the probe; 4) plug in the new
replacement probe (pay attention to the probe’s position); 5) screw on the probe ring tightly.
The replacement probes that are compatible with PH60-Z are:
• PH60-DE (Regular pH glass bulb probe), PH60S-DE (Spear pH probe for solids/semi-solids pH testing),
PH60F-DE (Flat pH probe for surface pH testing), ORP60-DA (ORP Probe).
Warrant y
We warrant this instrument to be free from defects in material and workmanship and agree to repair or replace free of
charge, at option of APERA INSTRUMENTS, LLC, any malfunctioned or damaged product attributable to responsibility of
APERA INSTRUMENTS, LLC for a period of TWO YEARS (SIX MONTHS for the probe) from the delivery. This limited
warranty does NOT cover any damages due to: accidental damage, unauthorized repair, normal wear and tear, or external
causes such as accidents, abuse, or other actions or events beyond our reasonable control.
To claim for warranty or seek additional help, please go to support.aperainst.com and click New support ticket.
Please provide the following information in the ticket:
To Next Page
Loading...
Need help?
General
