What to do if my Apex Digital Apex DT502 has no picture?
If your Apex Digital TV Converter Box shows no picture, here are a few things to try: * Ensure your video devices are turned on. * Try switching to another channel, as the digital TV channel signal may be weak. * Reconnect the antenna or cable wiring. * Make sure the Auto Scan Channels process is completed.
How to fix no sound on Apex Digital Apex DT502?
If you're experiencing no sound with your Apex Digital TV Converter Box, consider the following: * Check that the connected audio cables are fully inserted. * Ensure the correct audio source is selected on your amplifier. * Verify that the mute function is not enabled by pressing the Mute button on the remote.
What to do if Apex Digital Apex DT502 TV Converter Box cannot receive certain channels?
If your Apex Digital TV Converter Box isn't receiving certain channels, here are a few suggestions: * Use the automatic scanning function to add the channels not included in memory. * Reposition the antenna to improve signal strength. * The signal from the TV station may be weak.
Why is my Apex Digital Apex DT502 showing video noise or choppy picture?
If you are seeing video noise or a choppy picture on your Apex Digital TV Converter Box, try these steps: * Ensure that the connected video and audio cables are completely inserted. * Try repositioning the antenna.
How to fix Apex Digital Apex DT502 TV Converter Box blocked at certain channels?
If your Apex Digital TV Converter Box is blocking certain channels, you can try these solutions: * Use the automatic scanning method to add channels not included in the memory. * Check the parental control settings to ensure they are not restricting access.
What to do if there is a black box on screen with Apex Digital TV Converter Box?
If you see a black box on the screen when using your Apex Digital TV Converter Box: * The “Text” option may be enabled, and no text is available. * Turn off CCD on the remote control.
General| Product Type | Digital TV Converter Box |
|---|---|
| Input Signal | ATSC |
| Output Resolution | 480i, 480p, 720p, 1080i |
| Remote Control | Yes |
| Video Output | Composite |
| Audio Output | Stereo |
| Power Supply | AC 120V |
Identifies controls and indicators on the front panel of the DT502.
Details the input/output ports located on the rear panel of the DT502.
Explains how to connect the DT502 to a TV using composite AV cables.
Guides on connecting the DT502 for analog pass-through using RF cables.
Outlines the initial setup process for the DT502 converter box.
Explains how to access and use the Guide menu options: Simple, Full, and Reminder List.
To Next Page
