ApexDesk Vortex M Edition - Step 4: Frame to Desktop



 VortexMEditionDeskAssemblyGuide 9|Page



STEP4
Thisstepisatwo‐personjob.Carefullymovetheassembledframeontothedesktop.


Aligntheholesonthesupportbracketstopre‐installedanchorsonthetop.Secureeachsidewiththree
M6x16mmscrews.Adjustlevelingstudsonthefeetifneeded.Makesurethestubsmakesolidcontactwiththe
floorandthedeskdoesnotwobbleduetounevencontactwiththefloor.
