To maintain the safety and reliability of your
motorcycle, regular inspection and service is
required as shown in the Maintenance
Schedules that follow.
The Maintenance Schedule lists items that can be
performed with basic mechanical skills and hand
tools. Procedures for these items are provided in
this manual.
The Maintenance Schedule also includes items
that involve more extensive procedures and may
require special training, tools, and equipment.
Therefore, we recommend that you have your
motorcycle dealer perform these tasks unless you
have advanced mechanical skills and the required
tools. Procedures for items in this schedule are
provided in a service manual available for
purchase from your motorcycle dealer .
Because your motorcycle does not have an
odometer, service intervals in the maintenance
schedules are expressed in terms of riding days
as well as miles. Please check the engine
running hour meter which counting the
motorcycle used time , do the maintenance on
schedules.
If you do not feel capable of performing a given
task or need assistance, remember that your
motorcycle dealer knows your motorcycle best
and is fully equipped to maintain and repair it. If
you decide to do your own maintenance, use
only genuine motorcycle parts or their
equivalents for repair or replacement to ensure
the best quality and reliability.
Perform the pre-ride inspection at each scheduled
maintenance period.
Service Your Motorcycle 16
Each item on the maintenance schedule requires
some mechanical knowledge. Certain items
(particularly those marked *and**) may require
more technical information and tools. Consult
your motorcycle dealer.
* Should be serviced by your motorcycle dealer,
unless the owner has the proper tools and service
date and is mechanically qualified.
** In the interest of safety, we recommend these
items be serviced only by your motorcycle
dealer.
Maintenance Procedures:
I: inspect and clean, adjust, lubricate, or
replace, if necessary
C: clean
L: lubricate R: replace
To Next Page
Loading...