Need help?Do you have a question about the Apollo Sprayers PRECISION-5 PRO Limited Edition PLUS and is the answer not in the manual?
Explains DANGER, WARNING, CAUTION, and NOTICE symbols used in the manual.
Warns about flammable fumes, halogenated hydrocarbons, and ignition sources.
Discusses hazardous vapors, need for ventilation, and respirator use.
Explains static electricity risk and grounding procedures for safety.
Tips to prevent spray gun clogging and proper storage.
Details risks of improper grounding and wiring instructions.
Guidelines for using extension cords with appropriate gauge and grounding.
Lists and describes the main components of the HVLP turbine system.
Explains the function of the turbine unit, air hose, and spray gun in atomization.
Differentiates between bleeder and non-bleeder spray guns and basic fluid delivery.
Instructions for connecting hoses, plugging in, and environmental considerations for operation.
Refers to the spray gun manual and general preparation for spraying.
Describes the function and use of the integrated spray gun docking station.
How to connect the hose and gun, and initial power-up procedures.
Guidance on setting pressure using the dial and LCD, avoiding 'Max' setting.
How to adjust pressure using the control knob and the importance of flow pressure.
How coating viscosity affects pressure needs and troubleshooting tips for finish quality.
Explains filter warning, hour meter, PowerPause™, and ShutDown™™ modes.
Discusses resins, additives, and how manufacturers control coating properties.
Guidance on thinning various coatings and selecting appropriate viscosity for spraying.
Table showing turbine size, sealed air pressure, and compatible coating types.
Advice on thinning latex paint and using larger nozzle/needle sets.
Details nozzle, needle, and air cap combinations for various viscosities.
Chart detailing thinning percentages for different coatings and viscosity cup comparison.
Rules for distance, speed, overlap, and pattern for good spray application.
Explains fluid flow, distance, pattern direction, speed, and fan pattern size.
Refers to the spray gun manual for cleaning instructions.
Benefits like reduced gun weight, better access, and larger capacity.
Explains the need for a fluid hose, air line, and air compressor for pressure pots.
Steps for connecting fluid and air lines to the pressure pot and spray gun.
Procedure to test and adjust pressure pot air pressure for optimal material flow.
Steps for cleaning the pressure pot after use to prevent clogging.
Log for tracking turbine operational hours and purchase details.
Log for documenting performed maintenance tasks and dates.
Emphasizes unplugging the unit and using genuine parts for maintenance.
Instructions for removing, cleaning, washing, and reinstalling pre-filters.
How to check filter condition, remove, clean with air, and reinstall filter elements.
Specifies the service interval for carbon brush replacement and warranty implications.
Instructions on installing a Y-connector to run two spray guns from a 5-stage turbine.
Diagram illustrating the breakdown of components for Model 4500.
Comprehensive list of part numbers, descriptions, and quantities for Model 4500.
Diagram showing component breakdown and wiring for Model 4550.
Comprehensive list of part numbers, descriptions, and quantities for Model 4550.
Details the 2-quart (2 Liter) Fluid Feed System and its features.
Details the 2.5 gallon (10 liter) Mobile Cart and Fluid Feed System.
Lists Handi-Hold™ Docking Station, Pre-Filters, and Replacement Filters.
Lists various lengths and types of fluid and turbine air hoses.
Describes the FS1900 Deluxe Cleaning Kit with lifetime warranty.
Lists filter stand and various cup assemblies for spray guns.
Outlines the 2+3 year warranty, registration requirements, and exclusions.
Provides contact details and a warning about potential chemical exposure.
General| Brand | Apollo Sprayers |
|---|---|
| Model | PRECISION-5 PRO Limited Edition PLUS |
| Category | Paint Sprayer |
| Language | English |
To Next Page