Apollo Full Port & Standard Port Three Piece Ball Valves
Installation, Operation, & Maintenance Guide
Final Adjustments
Occasionally after testing or initial start-up, a minor stem packing leak
may occur. Adjust the stem packing as appropriate and as described
in the section entitled “Valve Adjustments”.
Name Plate Information
ASME/ANSI qualified valves feature a laser etching on the side of the
body. On qualified designs, 1-1/4” and larger, the CE logo will be
displayed. Example for illustrative purposes only, is shown in Figure 2.
ASME QUALIFIED VALVES:
CE QUALIFIED VALVES:
APOLLO MADE IN USA
Model Valve Size (in)
Ball & Stem Assembly Date
Press Rating (PSIG) Temp Range (F) @ Max Press (PSI)
Pressure (PSIG) @ Max Seat Temp (F)
↓
To Next Page
Loading...
