94
(3) Turn on the ignition switch, inspect
the fuel pressure, the pressure is
3Bar.
(4) Remove the spark plug, check if
has the flash fire.
Starting
(1) Keep oil passage in stable and
reliable.
(2) Keep the ignition system is in
working condition.
(3) Keep the gear lever in neutral.
(4) Keep the idle speed control valve
and intake pressure sensor is
connected correctly.
(5) Turn off the accelerator
completely, press the start switch
Attention!
If fail to start, turn off the start
switch few seconds, then start
again（not more than 5 seconds）
(6) Turn off the throttle, shift the gear
into “H”,”L” and “R” after the
vehicle completely stopped.
Warning!
When shift, must stop the car and
turn off the throttle, otherwise will
damage the machine and cause
the accident.
Warning!
●Keep the engine warn up few
minutes before start the driving.
●When the engine start, should
release the electric switch
immediately, each start time lasting
To Next Page
Loading...