53
the beginning to learn how to start,
turn and stop.
● Operate the UTV slowly until you are
familiar with it.
● The turning radius of this UTV is small
and agile, so the centrifugal force is
very high when turning at high speed.
Slow down to a more controllable
speed when turning to prevent the
UTV from rolling over.
● To prevent vehicle from rolling over,
be sure to only turn the vehicle at a
slow more controllable speed.
PRE-OPERATION CHECKS
Before using this vehicle, check the
following points
! WARNING
POTENTIAL HAZARD
Failure to inspect the vehicle before
operating. Failure to properly maintain
the vehicle.
WHAT CAN HAPPEN
Increases the possibility of an
accident or equipment damage.
HOW TO AVOID THE HAZARD
Always inspect your vehicle each time
you use it to make sure the vehicle is
in safe operating condition. Always
follow the inspection and maintenance
procedures and schedules described
in the Owner’s Manual.
Front and rear brakes
Brake fluid leakage
Check to see if any brake fluid is leaking
To Next Page
Loading...