46
Pre-drive Inspection
Check the following items before you
get on the UTV :
● Engine oil
Check the level and add oil if needed.
Check for leaks.
● Coolant
Check the coolant add coolant if
needed. Check for the leaks
● Fuel
Check the level and add fuel if
needed. Also make sure the fuel cap
is securely fastened. Check for leaks.
● Tires
Use a gauge to check the air
pressure. Adjust if needed. Also look
for signs of damages or excessive
wear.
● Nut &Bolts
Check the wheels to see that the axle
nuts are tightened, use a wrench to
make sure all accessible nuts, bolts,
and fasteners are tight.
! WARNING
mproperly maintaining this UTV or
failing to correct a problem before
driving can cause a crash in which
you can be seriously hurt or even
dead.
Always perform a reprieve
inspection before every drive and
correct any problems.
To Next Page
Loading...