89
! WARNING
Do nor connect the negative lead
of the jumper cable to the negative
terminal of the battery in the
vehicle.
● Be especially careful not to:
●touch the positive lead of the
jumper cable to the negative lead.
●reverse the polarity of the jumper
cables when connecting to the
batteries-battery explosion and/or
serious damage to the electrical
system may occur.
If a fuse blows
All of the electrical circuits on your
UTV have fuses to protect them from
damage caused by excess current
flow ) short circuit or overload).
If something electrical on your UTV
stops working, the first thing you
should check for is a blown fuse (1).
Check all the fuses before looking
elsewhere for another possible cause
of the problem. Replace any blown
fuses and check component
operation.
(1) Blown fuse
To Next Page
Loading...