It is recommended to configure the instrument for repeated thermal conductivity measurement.
Results of completed thermal conductivity measurements are available any time also during
measurement in progress. Results page for reviewing results may be activated on Measurement,
Stand By or menu page by pressing the key F4. Pressing the key F4 on the Measurement or Stand
By page opens the results database at the last completed measurement. Activating the Results page
from Menu page opens the results database at the last reviewed result.
Control keys on the Measurement page:
ESC .............................. exit (return to previous page)
F1 .................................. stop measurement
F2 .................................. skip waiting for thermal equilibrium
F4 .................................. review or deleting results
F5 ................................. System Menu
To Next Page
Loading...
