Control keys:
F2 ................................ switching to measurements of selected test
F5 ................................ deleting selected test results
▼▲ .............................. scrolling results
OK ............................... confirmation of selected item
ESC ............................. exit screen or close browsing table
Measurement results are organized in two levels. Repeated measurements on the same material are
regarded as one test (series of measurements). Arrow keys enable scrolling measurement results or
test results, which mean average values of measurement results taken as one series of
measurement. When test results are displayed, standard deviation of the average value is also
displayed. Pressing F2 enable entering into measurement results of the selected test. Returning to
test results from measurement results is possible by pressing the key F1.
Pressing the key F5 enables deleting the selected measurement or test result. Deleting has to be
confirmed by the key F3 or it may be discarded by means of the key F4.
Measurement results may be transferred into your PC by means of the supplied program
ResReadout_I2114.exe. Measurement results are transferred as text file with file extension “csv”
accepted by table processors.
To Next Page
Loading...
Need help?
General
