Content:
Date ........................................ actual date
Time ........................................ actual time
Language ............................... selection of language of devices user interface
BAUDRATE ............................ settings of baud rate of device communication interfaces
RS-232 ......................... baud rate of RS-232 communication interface: 300, 600, 1200, 2400,
4800, 9600, 19200, 28800, 38400, 57600 or 112000
USB ............................. baud rate of USB communication interface: 300, 600, 1200, 2400,
4800, 9600, 19200, 28800, 38400, 57600 or 112000
BACKLIGHT ........................... settings of backlight of display
Intensity ....................... backlight intensity: 10%, 20% … 90% or 100%
Auto off timeout ......... automatic backlight switch-off time: 1 / 2 / 5 / 10 / 20 / 30 min or
OFF (inactive)
POWER SUPPLY ................... settings of power supply
Auto off timeout ......... automatic power switch-off time: 1 / 2 / 5 / 10 / 20 / 30 min or 1 / 2 / 4
h or OFF (inactive)
SOUNDS ................................. settings of sounds
Keypad beep ............... acoustic indication of keys pressing: ON or OFF
End of meas. beep ..... acoustic indication when measurement is finished: ON or OFF
End of test beep ......... acoustic indication when test is finished: ON or OFF
Control keys:
F1, ESC ....................... exit (return to previous page)
F4 ................................ save all changes into memory (will be loaded after next switch on)
F5 ................................ switching between screens 1/2 and 2/2
To Next Page
Loading...
Need help?
General
