APRILIA MSS Mana GT ABS User Manual

Refitting the driven pulley
- Fit the driving belt in driven pulley with the specific
tool.
- Fit the assembled unit on the shaft.
See also
Refitting the
clutch
Drive-belt
- Make sure the driving belt is not damaged and does not show signs of abnormal wear.
- Replace according to the scheduled maintenance table.
Removing the driving pulley
- Lock the driving pulley using the specific tool.
Specific tooling
020660Y Driving pulley check ring
- Undo, remove the fixing screw and collect the washer.
- Extract the gear from the seat removing it from
the control bushing (remove completely after ex-
tracting the pulley).
MSS Mana GT ABS Engine
ENG - 249

APRILIA MSS Mana GT ABS Specifications

General

Displacement	839.3 cc
Power @ rpm	8000 rpm
Torque	73 Nm
Torque @ rpm	5000 rpm
Fuel System	Electronic fuel injection
Seat Height	800 mm
ABS	Yes
Transmission	Automatic
Fuel Capacity	16 L
Front Suspension	43 mm upside-down fork
Rear Suspension	Single shock
Front Brake	Dual 320mm discs
Rear Brake	Single 240mm disc
Engine Type	4-stroke, 90° V-twin engine