24
use and maintenance RSV mille - RSV mille R
SETTING THE HOUR
◆ When the push button g is pressed for
the second time, the hour segments (21)
start blinking in the lower part of the right
display (digital clock).
◆ To modify the hour setting, press the
“LAP” push button (6) on the left part of
the handlebar.
◆ To confirm the hour setting, press the
push button g.
SETTING THE MINUTES
◆ When the push button g is pressed for
the third time, the minute segments (22)
start blinking in the lower part of the right
display (digital clock).
◆ To modify the minute setting, press the
“LAP” push button (6) on the left part of
the handlebar.
◆ To confirm the minute setting, press the
push button g.
SETTING °C OR °F
◆ When the push button g is pressed for
the fourth time, the segments of the cool-
ant temperature in °C or °F (8) start
blinking in the upper part of the display.
◆ To modify from °C to °F setting, or vice
versa, press the “LAP” push button (6)
on the left part of the handlebar.
◆ To confirm the setting, press the push
button g.
SERVICEDIAG V BATT
21 22
SERVICEDIAG V BATT
8
RSVmille-R-UK.book Page 24 Friday, November 17, 2000 3:13 PM
To Next Page
Loading...
Need help?
General
