APS AEON - Safety Instructions; General Safety Guidelines; Electrical Safety Precautions

Bass Controller Switch
Position ON: bass-reflex with active filter
Position OFF: ”clear” quick bass-reflex
Tweeter Loudspeaker Level Switch
-5dB, -3dB, -1.5dB, -0.5dB, 0dB, 0.5dB, 1.5dB, 3dB
Inputs, Outputs
Input
Two types (common socket Combo):
- XLR symmetrical (balanced)
- TRS symmetrical (balanced) “6.3 mm”
Input impedance 10 kΩ
„Loop Through” Output
XLR symmetrical
Output impedance 100 Ω
Protections
Tweeter Loudspeaker Protection
Limiter (optical)
Bass/Mid-Range Loudspeaker Protection
Limiter (optical)
Power Amplifiers Protections
Interference, thermal, short circuit and
over-current limiters
Prevention from Interferences and Hums
GROUND LIFT switch
Signaling Devices
Tweeter Loudspeaker Protection Switching On
Lit up logo – green LED
Bass/Mid-Range Loudspeaker Protection Switching On
Lit up logo – red LED
Power Switching On
Lit up logo – blue LED
SAFETY INSTRUCTIONS
The lightning flash with an arrowhead symbol within an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the product.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.