Step 2
Install the Stick-On Feet in suitable places of the monitor base near the corners to ensure its stability.
Step 3
Put monitors in a vertical position – standing up, (although horizontal position - lying down - is also permissible), so
that the center (Tweeter Loudspeaker axis) will be located at the ear-level of the listener.
Step 4
Turn each monitor so that the Tweeter Loudspeaker will be turned in the direction of the listener.
Remark 3
The monitors can also be situated above the ear-level. In this case, it is necessary to tilt them so that the Tweeter
Loudspeaker will be turned towards the listener.
To Next Page
Loading...